The gasket is mainly sealed when the resistance of the medium is greater than the pressure difference between the two sides. From this process we can see that it is very easy to leak, which affects the performance of the product, so it is important to find out the factors that influence it.

Factors affecting the sealing of the water tank gasket:
1. The impact of the location. The use of this gasket is not only affected by light, weather, but also by the surrounding environment. Therefore, its service life will be different when it is placed outdoors and placed indoors. In order to reduce the environmental impact, it is very effective to use a protective cover or an insulating layer when used outdoors.

2. The use and installation are incorrect. The gasket is installed between the products, and its function is to ensure the sealing of the water tank chamber and prevent leakage of cooling water and lubricating oil. Therefore, its use and installation are not satisfactory, which directly affects the reliability of the tank seal and the service life of the gasket.

3, in order to ensure the quality of the seal, the selected gasket must be the same size and thickness as the original cylinder, the surface should be flat, the edging fits firmly, and there are no scratches, dents, folds and rust. Otherwise, it will affect the sealing quality of the water tank.

4. Factors affecting the sealing of the water tank gasket: The operating conditions refer to pressure, temperature and medium. The effect of simple pressure or media factors on the leak is not critical, but when pressure, medium and temperature work together, the problem can be severe.