In the production process, silica gel products often produce a series of bad conditions for various reasons, or may cause certain conditions during use, which seriously affect the final product quality, such as the poor elasticity of a certain component, sometimes It does not function as a shockproof, which greatly affects the use condition.

Reasons for poor elasticity of silicone products:
1. The formulation and quality of the raw materials can directly affect the products produced by the silicone products manufacturers, resulting in poor toughness, reduced rebound rate, etc., such as the water tank gasket, but also determine the raw materials according to the performance and hardness of the product. Production recipes and additive performance!

2, excessive force, especially in the long-term recycling of some machinery industry, resulting in excessive frequency and strength, leading to performance limits, long-term life will gradually decline.

3, the use of improper force leads to performance degradation, in some common and the same type of occasions used in the two different forces or different environments (such as ozone, oily heavy places) will lead to fatigue fatigue of silicone products and reduce life!

4, silicone products manufacturers production problems, in the manufacturer's production process due to the mixing of vulcanizing agents expected material hardness, the molding temperature of the vulcanization temperature, pressure and time may affect the elasticity and other properties of a silicone product.

Sometimes aging occurs, and the surface of the product is wrinkled and not smooth. Cause: The mold temperature is too high and the vulcanization time is too long. For example, the water tank gasket may have uneven thickness, and the surface of the hand touch has a concave and convex feeling, and the thickness is different. Cause: The mold is badly manufactured and the vulcanizing machine is not flat.